Samaya's Eco-Flooring - EcoWoodFloor.com
 
facebook  twitter  you tube  linked in  yelp
 
 
 
Browse by Type:
Information
Shipping & Returns
Privacy Policy
Terms & Conditions
Security
Faq
About Us
 
 


Cork Sheet
For more information, please visit this webpage.
Nova Cork Underlay 24" Natural Cork - Nova
 Contact for Price! 
Contact for price

Product Description

The Nova Cork Underlayment Collection

Nova Cork underlayment is a natural thermal & acoustic insulator that minimizes sound transmission from floor to ceiling on second floor applications and heat and cold transfer on ground floor applications. NovaCork is available in 6mm and 12mm thickness and is an excellent underlayment choice for a variety of floor coverings including, hardwood, marble, natural stone, ceramic or a floating floors. Nova Cork Underlayment is environmentally sound and is certified FSC.

Product Specifications

 

Brand:                               Nova                        

Species:                            Cork

Width:                               24" Inches

Length:                              36" Inches

Average Length:               36" Inches

Thickness:                        1/2" Inches

Quantity in Bundle:         150 SqFt

                           

 

 

 

Installation Specifications

Roll Cork Installation Instructions

BEFORE YOU BEGIN

Surface Preparation: Surfaces must be clean, dry and smooth, free of voids, loose material, grease, oil, sealers and any other impediments. Maximum floor variation is 1/8” in 10’. Surface areas requiring patching or leveling must be repaired prior to installation of underlayment.

NovaCork Underlayment: Available in 6mm sheets (in 2’x3’ sheets 300 sq/ft), 6 mm rolls (5’x40’ roll 200 sq/ft.) and 12mm sheets (in 2’x3’ sheets 150 sq/ft).

STEP 1

Unroll NovaCork underlayment and cut sections approximately 2” wide off roll. Vertically adhere this isolation barrier around the perimeter of the entire floor with Dritac 6200. Never fasten the isolation barrier with screws, nails or staples as this will severely diminish the acoustical values of the barrier.

STEP 2

Cut cork to length and lay cork loosely over the area to be covered. Both ends of the cork must curl down towards sub floor, if the ends curl up, turn the underlayment over. Butt the cork directly against the isolation barrier already installed.

STEP 3

Pull the loose laid material back at least half the length of the run. Using a 3/16” x 5/32” v-notch trowel for cork greater than ¼”, or 1/8”x1/8”x1/8” square notch trowel for ¼” thick cork or less, apply the subfloor adhesive (Dritac 6200) to the sub floor. Allow Dritac 6200 to flash for 30-40 minutes prior to placing cork into adhesive. Lay the cork back over the adhesive and roll in both directions with a 100 lb roller. Repeat procedure for the remaining side of this run. Proceed to cover the entire floor making sure all joints are butted together tightly.

STEP 4

Allow the adhesive to set prior to installing finish floor.

 

Environmental Attributes

Rapidly Renewable

Fiber from trees or other plants whose regrowth rate is 15 years or less from harvest.

LEED Credits

MRc6 Rapidly Renewable

First Product Previous Product 4 of 6 in Cork - Sheet Next Product Last Product